Technology

Archived Posts from this Category

2010-07-10

K9Mail Hosted Exchange ActiveSync Errors Solved

Posted by Robert Auch under Exchange, Open Source Software, Phones
Leave a Comment 

I’ve been fighting K9Mail for weeks now, trying to get it to sync with MailStreet who hosts “exchange.ms”) hosted Exchange. If you’ve already followed the instructions at the K9Mail Wiki with no success, read on.

Thanks to the k9mail wiki on debugging connection issues and the fact that I already had the Android SDK installed, I was able to solve the 2 related errors I was getting. I would either get an “HTTP 404 not found” or an “HTTP 501 Not Implemented” depending on the settings I chose. With no additional settings other than suggested in the Wiki, I’d get a “501 not implemented”. If I tried to set a mailbox path, or a WebDAV path, I’d get the HTTP 404 Not Found.

In the debugging log, I saw that the system was calling “http://mail.$domain.exchange.ms/”$webDAVpath/Inbox – if I set it to a full URL, the full URL was getting appended. When I attempted to hit those same paths in a full browser, I’d always get an HTTP 404. So, digging in my history in Firefox, I found the following (cleaned) path:
http://mail.$domain.exchange.ms/exchange/$emailaddress/
In this case $emailaddress was my Exchange mail address with the “@” stripped out. Appending “Inbox” to the end of this path resulted in a valid load of my OWA inbox.

Plugging then: /exchange/$emailaddress/ into the WebDAV box in K9Mail, and my email immediately loaded up.

Now I have Android syncing my calendars and contacts, and k9mail is handling my massive inbox!

 

2010-02-26

Device or resource busy trying to open /dev/sdx1

Posted by Robert Auch under Linux, VMWare | Tags: , , , |
Leave a Comment 

Because not enough information exists in easy-to-find searches: as a simple reminder – SCSI device IDs can and will change.

A few months ago I hot-added a new disk to an ssh bastion host (a VM on ESX). As these things tend to go, I eventually took a maintenance window and updated firmware/BIOS/OS on the ESX host. When the bastion VM came back online, however, I was presented with an odd error:

[root@bastion ~]: fsck /dev/sdc1
e2fsck 1.39 (29-May-2006)
fsck.ext3: Device or resource busy while trying to open /dev/sdc1
Filesystem mounted or opened exclusively by another program?
[root@oracle1 ~]# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext3 rw,data=ordered 0 0
/dev /dev tmpfs rw 0 0
/proc /proc proc rw 0 0
none /selinux selinuxfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
[root@oracle1 ~]# cat /etc/fstab
/dev/main/root / ext3 defaults 1 1
/dev/sdc1 /home ext3 defaults 1 2
/dev/main/var /var ext3 defaults 1 2
/dev/main/tmp /tmp ext3 defaults 1 2
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/main/swap swap swap defaults 0 0
# Beginning of the block added by the VMware software
.host:/ /mnt/hgfs vmhgfs defaults,ttl=5 0 0
# End of the block added by the VMware software

So everything in the fstab is how I left it – /dev/sdc1 is the new disk I added that is giving errors mounting. So I thought to check for corruption on the disk, and found the problem:

[root@oracle1 ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 5221 41833260 8e Linux LVM
Disk /dev/sdb: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 5221 41937651 83 Linux
Disk /dev/sdc: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 3917 31457279+ 8e Linux LVM

So, a simple fix – change “/dev/sdc1″ to “/dev/sdb1″ in /etc/fstab (or to VOLUME=home), and boot back up.

It’s not something that’ll probably happen on this server again, but it is something to be aware of, on both VM guests and on physical servers. This is why so many newer Linux OSes are using UUID= or VOLUME= instead of device path for SCSI disks.

 

2009-09-07

Upgraded WordPress

Posted by Robert Auch under Business, Security
Leave a Comment 

Upgrading software – always required to keep things secure. Windows, WordPress, Mac OSx, Linux, Office, Firefox, etc. So I just finished upgrading TotalNetSolutions.net again. Hopefully I’ll be able to be better about this, now that WordPress does the automatic upgrades now.

I’ve been doing the automatic upgrades on one of my other sites since they came out. They’re easy, fast, and even more painless than the 3-step upgrade that works so well. So now, I should be able to keep TNS much further away from the “cobbler’s kids” syndrome so many small company’s systems suffer with.

 

2009-05-07

KDE 4 and TweetDeck – small issue (fixed)

Posted by Robert Auch under Personal, Technology
Leave a Comment 

I’ve been using TweetDeck as a Twitter client for a while now, and love it. I recently updated my main laptop from Kubuntu 8.04 to Kubuntu 9.04, and even though the ATI x1300 3d driver is broken, I’m finally getting all the little annoyances fixed up.

The biggest issue I had, though, was after the upgrade, TweetDeck was just showing a blank window, with only the “Tweet/All Friends/Replies/Direct Messages/Groups/Favorites” etc. buttons on the top. There are a lot of posts about how to run Adobe Air and TweetDeck on x64 Ubuntu, but this is a 32-bit machine, so those fixes weren’t working.

The fix is surprisingly simple: make sure kwallet is running with an open wallet. Full details in a nice concise post from Peter Upfold, here. One of his commenters mentioned an issue, but I believe it turned out to be a “no wallets were open” problem. Thanks Peter!

 

2009-05-04

Turn off console beep on Ubuntu 9.04

Posted by Robert Auch under Linux
Leave a Comment 

It used to be that you could edit /etc/modprobe.d/blacklist and add “blacklist pcspkr” to turn off the console beeps entirely on Ubuntu / Kubuntu.  As of 9.04, the module is now called “snd_pcsp”.

So, to turn off console (not X terminal, but tty) beeps, you can do one of the following:
1) (This is my preference)

echo blacklist snd_pcsp >> /etc/modprobe.d/blacklist.conf

2) (I’ve done this, but it doesn’t affect all software)

for i in 1 2 3 4 5 6
do
setterm -blength 0 > /dev/tty$i
done

3) (Only works per shell if ~/.inputrc is included)

echo set bell-style visible >> ~/.inputrc

Enjoy more-sane editing from ttyX in the future!

 

« Previous Page — Next Page »